24" x 24" with drain cut out. Part Number: 4100-24X24 Color: White Ships To: Continental USA (Lower 48 States)
|
The Flex Track® 24" x 24" Fine Grade Shower Mat is a self adhesive (peel and stick product) that has been designed for foot-friendly, non-slip protection in showers and bathing areas. The 24” x 24” mat comes standard with a drain cut out in the center. A vinyl textured safety tape that is perfect for slippery shower areas. Color is white and should be applied to smooth surfaces only and all grout lines must be avoided. Periodic cleaning is necessary. Use a stiffed bristled scrub brush with a commercial tub and tile cleaner designed to remove soap scum and body oils. Installation: Apply to a smooth surface only and avoid all grout areas.Before you begin, your tub/shower must be completely clean of all soap residue and thoroughly dry. Clean tub/shower with a biodegradable cleaner. Cleaning solutions containing silicone or products that leave a residue or coating, including powdered cleaners, must be avoided. 1) Clean hands thoroughly. Then using your fingertips, peel back one to two inches of the paper backing along the edge of your mat to be placed closest to the drain. Slightly crease the paper, try to avoid touching the adhesive backing.
2) Adhere the exposed adhesive end of your mat. With the exposed section in place, reach under the mat and gently peel the creased paper backing slowly off, while you continue to carefully and firmly rub over the entire surface of the mat from the middle out. Be sure all edges are properly adhered to the tub/shower surface. Use of a hand or rubber roller will aid in the adhesion of the mat.
|
|





