Testing of adhesive before installation is suggested.
Surface temperature must be above 55°.
Apply to smooth surface. Repair application area by filling in any cracks and pits. Seal porous surfaces. DO NOT apply over grout lines.
Clean surface using industrial cleaner. Remove any oils, dirt, and flaking paint.
Flush surface to remove any soap residue.
Cut to size. Rounding corners is suggested.
Peel off paper backing. Keeping fingers off adhesive.
Position and Press in to place, pushing from the center out to the edges to remove any air bubbles. For enhanced bond use a rubber hand roller.
Surface can be cleaned using mild floor cleaner as directed.